Panels, Switchboards and Motor Control Centers

Panels, switchboards and motor control centers are to be written up on a separate pric­ing sheet. By using the distribution riser diagram and the panelboard schedules, begin by grouping panels by their amperage size (starting with the smallest panel), their voltage and the type of termination (main lug only or main circuit breaker).

As each panel is counted and written up, color in the panel on the riser diagram with a light green pencil. Also color in the heading of each panel on the panelboard schedule sheet with a light green pencil.

Directly below the listing of the panels, write up the switchboards by their amperage size beginning with the smallest and finishing with the largest. As they are written up, color them in on the riser diagram with a light green pencil.

Follow this same procedure for motor control centers.