AutoBranch

AutoBranch eliminates hours, days and even weeks of estimating time!

Whether it’s a $50,000 job or a $5,000,000 job, AutoBranch calculates a bill of material in seconds.

Our award winning AutoBranch has proven to double your estimating volume without having to increase your overhead by hiring additional estimators.

With short bid times and poor drawings, we had to find a fast and accurate way to prepare estimates.  We found it.  It’s called AutoBranch.  It’s the result of more that twenty-three years of studying branch circuits.

If you invest in tools to complete your jobs quickly and efficiently then you should add AutoBranch to your list of tools to complete your estimates quickly and efficiently.

"Every electrical estimator should have this"

Our studies have shown that:

  • There is no “average” of branch circuit footage for commercial work.
  • Conduit and wire labor for commercial work represents 60% of the total labor hours.
  • “Averaging” branch circuit footage that is just 10% too low guarantees a 6% overrun of total labor hours and 3% overrun of total material costs.

"We were looking at three days of measuring branch circuits on a large school job. AutoBranch produced a complete bill of materials in 30 seconds! We immediately ordered more AutoBranch programs for our estimators"

Save Time & Money

Developed by professional estimators that have prepared over 33,000 estimates since 1975.

AutoBranch is a stand-alone software application that instantly calculates a complete priced and labored bill of material for 15 and 20 amp lighting and receptacle circuits including line and low voltage lighting control, occupancy sensors, daylight sensors, powerpacks and low volt control wire.

It also calculates additional wire for light fixtures either with emergency batteries or on a night light circuit.  For fixtures in continuous rows it will calculate chase nipples, locknuts, tap connectors and additional wire pulled through the fixture channels.

Once counts have been entered, AutoBranch calculates the conduit, wire, fittings, conduit supports, boxes, wirenuts, pigtails, fixture whips, luminaire cable and low voltage control wire.

With one click, the bill of material can be converted from hard wiring to MC or HCF cable.

AutoBranch will also calculate Romex for your residential projects.

Bonus Software Included!

Duct Bank Calculator

Duct Bank Calculator is a stand-alone software application than automatically calculates total length of conduit, cubic yards of concrete, length of re-bar, length of counterpoise, spacers, warning tape, concrete dye and cubic yards of excavation.

What does it calculate?

Fill Out the Form Below to Sign up for Free Trial