Page 521 - Electrical Price & Labor Units Guide
P. 521
06-21-21
270-37
CADDY (ERICO) CONDUIT TO WIRE HANGERS
Average Suggested LABOR HOURS
Description Cat # Cost Resale (0-6') (6-10') (10-15') (15-20')
1/2" EMT #10-9 Wire K8 0.35 0.52 0.02 0.03 0.04 0.05
3/4" EMT #10-9 Wire K12 0.40 0.56 0.02 0.03 0.04 0.05
1" EMT # 8-9 Wire K16 0.60 0.68 0.02 0.03 0.04 0.05
1-1/4' EMT # 8-9 Wire K20 0.89 1.00 0.03 0.04 0.05 0.06
1/2" GRC #10-12 Wire K8 0.35 0.52 0.02 0.03 0.04 0.05
1/2" GRC # 8-9 Wire K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" GRC #10-9 Wire K12 0.40 0.56 0.02 0.03 0.04 0.05
CADDY (ERICO) CONDUIT TO ROD HANGERS
Average Suggested LABOR HOURS
Description Cat # Cost Resale (0-6') (6-10') (10-15') (15-20')
1/2" EMT to 1/4" Rod K8 0.35 0.52 0.02 0.03 0.04 0.05
3/4" EMT to 1/4" Rod K12 0.40 0.56 0.02 0.03 0.04 0.05
1" EMT to 1/4" Rod K16 0.60 0.68 0.02 0.03 0.04 0.05
1-1/4' EMT to 1/4" Rod K20 0.89 1.00 0.02 0.03 0.04 0.05
1/2" GRC to 1/4" Rod K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" GRC to 1/4" Rod K16 0.60 0.68 0.02 0.03 0.04 0.05
CADDY (ERICO) CONDUIT TO 1/4" FLANGE
Average Suggested LABOR HOURS
Description Cat # Cost Resale (0-6') (6-10') (10-15') (15-20')
1/2" EMT to 1/4" Flng K8 0.35 0.52 0.02 0.03 0.04 0.05
3/4" EMT to 1/4" Flng K12 0.40 0.56 0.02 0.03 0.04 0.05
1" EMT to 1/4" Flng K16 0.60 0.68 0.02 0.03 0.04 0.05
1-1/4' EMT to 1/4" Flng K20 0.89 1.00 0.03 0.04 0.05 0.06
1/2" GRC to 1/4" Flng K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" GRC to 1/4" Flng K16 0.60 0.68 0.02 0.03 0.04 0.05
1" GRC to 1/4" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
CADDY (ERICO) CONDUIT TO 3/8" FLANGE
Average Suggested LABOR HOURS
Description Cat # Cost Resale (0-6') (6-10') (10-15') (15-20')
1/2" EMT to 3/8" Flng K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" EMT to 3/8" Flng K16 0.60 0.68 0.02 0.03 0.04 0.05
1" EMT to 3/8" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
1/2" GRC to 3/8" Flng K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" GRC to 3/8" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
1" GRC to 3/8" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
CADDY (ERICO) CONDUIT TO 1/2" FLANGE
Average Suggested LABOR HOURS
Description Cat # Cost Resale (0-6') (6-10') (10-15') (15-20')
1/2" EMT to 1/2" Flng K12 0.40 0.56 0.02 0.03 0.04 0.05
3/4" EMT to 1/2" Flng K16 0.60 0.68 0.02 0.03 0.04 0.05
1" EMT to 1/2" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
1/2" GRC to 1/2" Flng K16 0.60 0.68 0.02 0.03 0.04 0.05
3/4" GRC to 1/2" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
1" GRC to 1/2" Flng K20 0.89 1.00 0.02 0.03 0.04 0.05
MATERIAL PRICES AND LABOR UNITS ARE PER EACH
NPG/NSG AVERAGE COST COLUMN IS A NATIONAL AVERAGE AND SHOULD BE VERIFIED FOR YOUR AREA
23-27 COPYRIGHT © 1996-2021 by ELECTRICAL RESOURCES, INC.
