Page 515 - Electrical Price & Labor Units Guide

06-21-21
270-31
CADDY (ERICO) STRAP HANGER CLIPS - Parallel

Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')

1/8" to 1/4" MSS24 2.75 4.74 0.02 0.03 0.04 0.05
5/16" to 1/2" MSS58 2.75 4.74 0.02 0.03 0.04 0.05
9/16" to 3/4" MSS912 3.39 5.85 0.02 0.03 0.04 0.05

CADDY (ERICO) STRAP HANGER CLIPS - Right Angle
Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')

1/8" to 1/4" MSR24 2.83 4.88 0.02 0.03 0.04 0.05
5/16" to 1/2" MSR58 2.83 4.88 0.02 0.03 0.04 0.05
9/16" to 3/4" MSR912 3.47 5.99 0.02 0.03 0.04 0.05

CADDY (ERICO) ROD HANGER CLAMPS - #8 Wire or 1/4" Rod

Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')

1/8" to 1/4" 70824 3.47 5.99 0.02 0.03 0.04 0.05
5/16" to 1/2" 70858 1.42 1.59 0.02 0.03 0.04 0.05
9/16" to 3/4" 708912 2.01 2.26 0.02 0.03 0.04 0.05

CADDY (ERICO) ROD HANGER CLAMPS - 3/8" Rod
Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')
1/8" to 1/4" 6A24 1.54 1.73 0.02 0.03 0.04 0.05
5/16" to 1/2" 6A58 1.56 1.75 0.02 0.03 0.04 0.05
9/16" to 3/4" 6A912 1.90 2.13 0.02 0.03 0.04 0.05

CADDY (ERICO) ROD HANGER CLAMPS - 1/4" Threaded Rod
Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')

1/8" to 1/4" 4TI24 1.45 1.62 0.02 0.03 0.04 0.05
5/16" to 1/2" 4TI58 1.45 1.62 0.02 0.03 0.04 0.05
9/16" to 3/4" 4TI912 1.93 2.18 0.02 0.03 0.04 0.05

CADDY (ERICO) ROD HANGER CLAMPS - 3/8" Threaded Rod

Average Suggested LABOR HOURS
Flange Size Cat. No. Cost Resale (0-6') (6-10') (10-15') (15-20')

1/8" to 1/4" 6TI24 1.52 1.72 0.02 0.03 0.04 0.05
5/16" to 1/2" 6TI58 1.52 1.72 0.02 0.03 0.04 0.05
9/16" to 3/4" 6TI912 1.94 2.20 0.02 0.03 0.04 0.05

MATERIAL PRICES AND LABOR UNITS ARE PER EACH
NPG/NSG AVERAGE COST COLUMN IS A NATIONAL AVERAGE AND SHOULD BE VERIFIED FOR YOUR AREA
23-21 COPYRIGHT © 1996-2021 by ELECTRICAL RESOURCES, INC.